Originally posted by OKCDAWGZ:
I have new Samsung PC3200 400MHz Dual Channel DDR memory (512x2) and when I bootup my ASUS A7N8X2.0 board, it registers as 200MHz Single Channel Mode.........is that right?
If you have two sticks of memory and they are in the correct ram slots then I think it should automatically use dual channel mode, that was how it worked for me anyway.
Note that you must
use the correct two ram slots otherwise it wont work. Notice how that motherboard has two ram slots that are real close together and one that is slightly seperated from the other two. Put one ram stick in this seperated slot and the other ram stick in either of the two close together ones.