8KDA3+/J new modded Bios

[versa]

Just in case u are not noticed, there is a modded
bios in AOA that for 8KDA3+/J with the new 1.8v vcore option that is highest as 1.85v that u actually can use. The Modded BIOS based on KDA3716.

[img]tongue.gif[/img]

[fredyama]

Thank you for your inf. Have you tried this mod bios as mine was already V-modded?

[versa]

Yes, tried and using...excelllent mod and vcore voltage are quit stable as those set in BIOS, especially the vdimm, no more big undervoltage.. nice mods, that's what I can say. ;)

Now only wait a working bios mod to vdimm(+0.1~.2v) voltage then this board is really a very good board.

:D

I will do the vdimm mod if my soldering skill is good enough :(

[fredyama]

Glad to know the mod bios solved your Vcore undervoltage issue. BTW, what CPU cooling are you using?

[versa]

on water

[fredyama]

Yeah, on water, should remember you have mentioned in other post.
As for soldering, I have practiced many times using pcb/electronic kit with low wattage soldering iron (23-30w) before actually done to MB. It's not so difficult once used to.
Anyway, agree that 8KDA3+/J is very solid and fast MB for sure once Vcore undervoltage issue is over.

[versa]

Yeap, I will practice more b4 going into action ;)
BTW, the NX feature of XPSP2 is really good. That's the first time I see MS thingy that intels not support but AMD do except the 3DNow Tech...... :D

[bluetooth]

What is NX feature of XPSP2

[versa]

DEP
Data Execution Prevention

;)