How do I get the IT7 to use my DDR2700 at that speed??

[fooruku]

Has anyone been able to get the IT7 to run DDR 2700 and 333MHz? And if so how I am feeling very dumb about now.
I know it is only rated to 266, but there must be a way to overclock it.
Please help

[TGA78]

Ok well I removed my reply since your board wasn't what I thought. Sorry maybe someone else knows a solution if there is one.

[TGA78]

Ok well you board should support DDR333 but only at 533 FSB I believe.

[rauldellobo]

This is an old thread but for the record, your board does not support that speed. It does, however, support DDR356 through some manipulation in the bios. Set the ram at low ratio of 3:4 for the cpu and you will see DDR 356 with the FSB of 133MHz, assuming your RAM can handle it.

With a 1:1 ratio, DDR200 for 100(x4) FSB and DDR266 for 133(x4). With the low ratio 3:4, DDR 266 for 100(x4) FSB and DDR356 for 133(x4). With a high 4:3 ratio, don't go there; the performance is really low.