AT7 Max2 1/6th

In the review it says 1/6th divider is present but has no mention of it working stabily. There are many other boards that say the 1/6th divider has been removed from the latest BIOS and will not be present anymore as it will not operate correctly. Someone correct me if i'm wrong.

[YOSHI]

Did you see review of AT7 MAX2 on this OCworkbench? I don't know why they are using PC3200 with DDR333(PC2700) setting. Not set to DDR400(FSB200Mhz). I think there is no function of DDR400 (1/6 divider)on KT400 boards so far. But this is not only for ABIT. All other KT400 boards are same so far. So I guess, they pulled out 1/6 divider from updated BIOS.

[bluetooth]

There is no point testing it at DDR400 (as mentioned in the review) as the results are not much of an improvement over aggressive DDR333 timings.

1/6 multiplier has got to do with the FSB, not with the ASync DDR settings

[xgman]

The current KT400 chipset does not support a 1/6 divider. The orig. abit bios was a mistake.

[Brian]

this is Abit explaining that it is not in the VIA KT400 Bios

http://www.abit.com.tw/abitweb/webjs...STION=AT7-MAX2

[Rui]

Does this board support the P-ATA133 raid 0 function by using two ATA133 hard drive???

I wasted my time on the Asus A7V8X board, and I don't want to do it again!